Troubleshooting Guide - Astralpool 66175 Manual De Instalación

5

TROUBLESHOOTING GUIDE

•
The device does not turn on...
o Check that the power cables are properly connected
o Verify that the mains electrical power is functioning
•
The display does not light up...
o Adjust the display's brightness and contrast
•
Chemical measurement is not working...
o Check the connection of the probe
o Check the connection of the probe support
o Perform the calibration procedure as described in the manual
o Replace the probe
•
The mA output does not change...
o Check the connections of the cables
o Use the "Manual Control" Main Menu to check whether the output produces the desired
effect.
o Check the electrical characteristics of the remote device (Maximum load 500 ohms)
•
The relays do not work...
o Check that the instrument is properly powered
o Check the settings in the main menu
•
The voltage at the DC input does not block the instrument...
o Check the electrical connections
o Check whether the remote generator is functioning properly.
Note: If any malfunction should persist, please contact your supplier.
0000137242 Rev. 6.0 27