Aiwa Z-HT63 Manual Del Usuario página 11

MEMCIRIZIING THE NEW EQUALIZATION
CURVES
lJp to
4 customized equalization curves can be stored on the
MANUAL mode Ml -M4.
1
The DSP (Digital Signal Processor) SURROUND system can
create the effect of sound reflected from walls and ceilings. This
Set a new equalization curve with GEQ FREQ and
system enhances 4 types of sound presence.
MULTI JOG.
DISCO: Sound presence of a disco
See "SETTING NEW EQUALIZATION CURVE MANUALLY
LIVE: Sound presence of a live music performance
STADIUM: Sound presence of a stadium
on page 10.
The created equalization curve is displayed for 8 seconds.
HALL: Sound presence of a concert hall
2 Within 8 seconds press ENTER.
———. !
"MEMORY is displayed and all the manual mode indicators
flash for 8 seconds. Go to step 3 within those 8 seconds.
c If this step is not completed within 8 seconds, press GEQ
FREG first to display "GEQ ON". Then press ENTER within
8 seconds.
;3 While the manual mode indicators are flashing,
press one of the graphic equalizer preset buttons
M1-M4.
SUR-
ROUND
MANUAL
SELECT
++,W
The actualization curve is stored.
To select the stored equalization curve -u
11 Press lPRGM/MANU to select the MANUAL mode.
The MANUAL indicator turns on.
2! Press one of the graphic equalizer preset buttons MI–M4.
Press one of the DSP SURROUND mode buttons.
The selected mode indicator flashes and that mode appears for
4 seconds on the display.
Equalization curves are selected automatically to match the DSP
SURROUND modes and can also be selected or turned off to
suit your preference.
When the music source is monaural
Select LIVE to obtain a simulated stereo effect. When DISCO or
HALL is selected, no sound will be heard from the surround
speakers.
To cancel the selected mode
Press the selected DSP SURROUND mode button again. "DSP
OFF" is displayed.
To select with the remote control
Press SURROUND repeatedly until the desired mode is
displayed.
To adjust the volume of the surround speakers
Press MANUAL SELECT twice or three times on the remote
control. "S-L" or "S-R" is displayed for 2 seconds. Press + or
- on the remote control within these 2 seconds.
The DOLBY PRO LOGIC (page 23) and the DOLBY DIGITAL
SURROUND (page 31) surround speakers level is also
changed.
The DSP SURROUND mode is canceled when:
- the ECHO is turned on.
- the DOLBY PRO LOGIC is turned on.
- the headphones are plugged in.
- the 5.1 CH (page 31) is selected.
ENGLISH 1 I