Tabla de contenido
Publicidad
Print Quality/Layout
Problems
Problemi di qualità
di stampa/layout
Problemas con la
calidad/composición
de la impresión
Problemas de
qualidade de
impressão/esquema
0
EN
Try the following solutions in order from the Top. For further information, see your online User's Guide.
Problems
You see banding (light lines) in your printouts or copies.
Your printout is blurry or smeared.
Your printout is faint or has gaps.
Your printout is grainy.
You see incorrect or missing colors.
The image size or position is incorrect.
Solutions
Make sure you select the correct paper type in each Print Settings menu.
A
Make sure the printable side (the whiter or glossier side) of the paper is facing in the right direction.
B
& 42
Clean the print head.
C
R
Align the print head from Maintenance in the Setup menu on the LCD panel. If quality is not improved, try aligning using
D
the printer driver utility. See your online User's Guide to align the print head.
To clean the inside of the printer, make a copy without placing a document on the document table. For further information,
E
see your online User's Guide.
For best results, use up ink cartridge within six months of opening the package.
F
Try to use genuine Epson ink cartridges and paper recommended by Epson.
G
If a moiré (cross-hatch) pattern appears on your copy, change the Reduce/Enlarge setting or shift the position of your
H
original.
Make sure you selected the correct Paper Size, Layout, and Reduce/Enlarge setting in each Print Settings menu for the
I
loaded paper.
Make sure you loaded paper (
R
J
If the edges of the copy or photo are cropped off, move the original slightly away from the corner.
K
Clean the document table. See your online User's Guide.
L
& 16) and placed the original correctly.
Solution No.
ABCDEFH
ABCDEG
ABCF
D
CF
IJKL
& 16
R
Publicidad
Tabla de contenido
