Start A Scan - HP Scanjet N6310 Guía De Inicio

Chapter 2
c. If the negative strip has fewer than three frames, insert the negatives light-shield
into the negative strip holder, making sure the edge of the light-shield touches the
last frame.
d. Insert the negative strip holder back into the slide holder.
4. Close the scanner lid.
See also
"Start a scan" on page 18
Tips for scanning transparent items
• To scan transparent items larger than those that the transparent materials adapter
(TMA) accepts, place the transparency on the scanner glass, place a white sheet of
paper on top of the transparency, and then scan.
• For Windows: When scanning a negative, the default scan shortcut automatically
enlarges the image to approximately 6.7 x 10 cm (2.64 x 4 in). If you want the final
image to be larger or smaller, start the scan with the HP scanning software and then
use the Resize tool in the HP Scanning preview window to set the scaling to the final
size that you want. The scanner will scan the item to the size that you select and
adjust the scan resolution as appropriate. For more information, see the scanner
software help.
• For Macintosh: When scanning a 35 mm slide or negative, the HP scanning software
automatically enlarges the image to approximately 10 cm x 15 cm (4 x 6 in). If you
want the final image to be larger or smaller, start the scan with the HP scanning
software and use the tools provided to resize the image. For more information, see
the scanner software help.

Start a scan

This section describes the methods you can use to start a scan.
Use the Scan button
To scan using the Scan (
1. Load the originals.
2. Use
NOTE: If the scanner LCD indicates there are no scan shortcuts on the scanner,
you must upload the scan shortcuts before you can scan.
3. Press the Scan (
scan and sends the scan to the location specified in the scan shortcut.
NOTE: If you want to preview and edit your scan before sending it, start the scan
from the HP scanning software.
See also
• "Upload default scan shortcuts to the scanner" on page 5
• "Use the HP scanning software" on page 19
18 HP Scanjet N6310
) button on the scanner, follow these steps:
and on the scanner control panel to select the scan shortcut.
) button on the scanner control panel. The scanner starts the