During Operation; Fan Speed Setting; Automatic Defrost Function - UFESA DH4020 Manual De Instrucciones

● Press the timer button (B) to disable the automatic
on function. Use "–" button (C) to set the time to 0.0.
Setting the on/off time
1
Press the timer button (B). On indicator (L) lights
up on the display.
2
Use the "+" (D) or "–" (C) button to set the time
in hours (0-24 hours), after which the appliance will
automatically turn on.
3
Press the timer button (B) again. Off indicator (K)
lights up on the display.
4
Use "+" (D) or "–" (C) button to set the time in
hours (0-24 hours), after which the appliance will
automatically turn off.
The selected time will be saved within
5 seconds, then the display shows
current level of humidity in the room.
● Press the timer button (B) to disable the automatic
on function. on indicator (L) lights up on the display.
Use "–" button (C) to set the time to 0.0.
● Press the timer button (B) to disable the automatic
off function. off indicator (K) lights up on the display.
Use "–" button (C) to set the time to 0.0.

During operation

When the appliance is operating, you can set the time
after which it will automatically stop. You may also set
the time after which the appliance will automatically
resume operation.
Setting the appliance off time only
1
Press the timer button (B). off indicator (K) lights
up on the display.
2
Use the "+" (D) or "–" (C) button to set the time
in hours (0-24 hours), after which the appliance will
automatically turn off.
The selected time will be saved within
5 seconds, then the display shows
current level of humidity in the room.
● Press the timer button (B) to disable the automatic
off function. Use "–" button (C) to set the time to 0.0.
Setting the off and subsequent on time
1
Press the timer button (B). off indicator (K) lights
up on the display.
2
Use the "+" (D) or "–" (C) button to set the time
in hours (0-24 hours), after which the appliance will
automatically turn off.
3
Press the timer button (B) again. on indicator (L)
lights up on the display.
G
4
Use "+" (D) or "–" (C) button to set the time in hours
(0-24 hours), after which the appliance will automatically
resume operation.
The selected time will be saved within
5 seconds, then the display shows
current level of humidity in the room.
● Press the timer button (B) to disable the automatic
off function. off indicator (K) lights up on the display.
Use "–" button (C) to set the time to 0.0.
● Press the timer button (B) to disable the automatic
on function. on indicator (L) lights up on the display.
Use "–" button (C) to set the time to 0.0.
Time may be changed in increments of
0.5 h to 10 h, and then by 1 h up to 24 h.
Automatic on/off function will be
cancelled if after being enabled, the user
will turn on or off the appliance.
Automatic on/off function will be
cancelled when the display shows P2
warning code.

FAN SPEED SETTING

H
You may adjust the fan speed.
1
Press turbo button (A) to select high fan speed.
● To return to the normal fan speed press turbo button
again.
For maximum dehumidification
performance, set the high speed fan.
If humidity in the room is reduced and
silent operation is required, set the
normal fan speed.
I

AUTOMATIC DEFROST FUNCTION

If frost appears on the evaporator' s coils, the compressor
turns off, and the fan will run until frost is removed.
The display shows P1 code.
J