Forward / Reverse Switch; Preparation For Use - Bostitch BTMT72391 Manual De Operación Y De Mantenimiento

FORWARD / REVERSE SWITCH

Instruction Manual.
Wear eye and ear protection.
Switch position for driving fasteners.Tool power
increases with higher numbered setting.

PREPARATION FOR USE

PROPER USE OF THE TOOL
Your new 1/2" Drive Impact Wrench is designed for driving,
tightening and loosening threaded fasteners, usually nuts and
bolts, when fitted with a suitable impact socket.
Always use impact-rated extension bars,
universal joints and socket adapters between the
square output drive of the impact wrench and the female square
drive of the socket. Do not use the tool for any other purpose than
that specified without consulting the manufacturer or the
manufacturer's authorized supplier.To do so may be dangerous.
Never use the impact wrench as a hammer to dislodge or
straighten cross threaded fasteners. Never attempt to modify the
tool for other uses.
WORK STATIONS
Your impact wrench should only be used as a hand operated tool. It is always recommended that the tool
is used when standing with solid footing. It can be used in other positions but before any such use, the
operator must be in a secure position having a firm grip and footing and be aware that when loosening
fasteners the tool can move quite quickly away from the fastener being undone. An allowance must
always be made for this rearward movement so as to avoid the possibility of hand/arm/body entrapment.
use: Repetitive motions or
exposure to vibration may be
harmful to your hands or arms.
90psig (6.2bar) Maximum
Air Pressure. Wear eye and ear protection.
Switch position for removing fasteners.
1/2"
Square
Drive
- 8 -
Instruction Manual. use: Repetitive motions or
exposure to vibration may be
harmful to your hands or arms.
90psig (6.2bar) Maximum
Air Pressure.
Trigger
Air inlet
Forward/
Reverse
Torque
Forward/
Reverse
Lever