Cleaning and maintenance
Weekly cleaning of the brew group
1
2
2 Place a container under the steam wand.
3 Press the HOT WATER button. Hot water dispensing starts automatically.
4 Press the OK button to stop hot water dispensing. Remove the container.
Clean the brew group once per week.
1 Remove the coffee grounds container and open the service door.
2 Remove the coffee residues drawer.
3 To remove the brew group, press the lever and pull the brew group out of
the machine.
4 Rinse the brew group with fresh water and let it air dry.
5 To place the brew group back, make sure that the lever is in contact with
the base of the brewing unit.
Note: If it is not in contact with the base, push it down.
English
15