mundoclima MUPO-H8 Manual De Instalación Y Usuario página 64

Remote controller
Usage
Fix batteries
1.Slide open the cover according the direction indicated
by arrowhead.
2.Put into two brand new batteries (7#), position the
batteries to right electric poles (+ -).
3.Put back the cover.
Automatic operation mode
1.Press the MODE button, select the automatic operation
mode.
2.Press the SPEED button, you can select fan speed.
You can select fan speed from LOW, MID, HIGH, AUTO.
3.Press the ON/OFF button, the operation indicator is on,
the air-conditioner starts to operate the automatic mode.
Press the button again, the air-conditioner stops.
Cooling/Heating operation mode
(cold wind type has no heating function)
1.Press the MODE button, select the C ooling or Heating
operation mode.
2.Press the
temperature can be set at 1
16-32 .
3.Press the SPEED button, you can select fan speed.
You can select fan speed from LOW, MID, HIGH, AUTO.
4.Press the ON/OFF button, the operation indicator is on,
the air-conditioner starts to operate the automatic mode.
Press the button again, the air-conditioner stops.
or button, set the temperature,
difference range from
64