Water Drainage - mundoclima MUPO-H8 Manual De Instalación Y Usuario

Installation

Water drainage

*
During dehumidifying mode, remove the upper drain plug from the back of the unit.
Attach the drain hose to the hole. Place the other end of the hose in the drainage
way or other drain areas .
*
If the unit you bought has the pump drain outlet, as shown below, please drain in this
way :
Remove the pump drain plug from the back of the unit, attach the drain hose to the
hole. Place the other end of the hose in the drainage way or other drain areas.
Pump
drain outlet
Note: Make sure the hose is secure and there are no leaks. Direct the hose toward the
drain, making sure that there are no kinks that will stop the water flowing. Place the
end of the hose into the drain and make sure the end of the hose is down to let the
water flow smoothly. Do never let it up.
*
When the water level of the bottom tray reaches predetermined level, the digital display
area shows "P1"and the WATER FULL indicator light illuminates.
Carefully move the unit to a drain location, remove
the bottom drain plug and let the water drain away.
Reinstall the bottom drain plug and restart the
machine until the P1 symbol disappears. If the error
repeats, call for service.
NOTE: Be sure to reinstall the bottom drain
plug before using the unit.
Drain outlet
52
Bottom tray
Drain outlet