Introducción De La Etiqueta De Servicio Del Sistema Mediante System Setup (Configuración Del Sistema) - Dell EMC PowerEdge R230 El Manual Del Propietario

NOTE: If you are using Easy Restore, you do not have to import an existing iDRAC Enterprise license.
6 Ensure that you perform the following steps:
a Use the Easy Restore feature to restore the service tag. See the Restoring the Service Tag by using the Easy Restore feature
section.
b If the service tag is not backed up in the backup flash device, enter the system service tag manually. See the Entering the
system service tag by using System Setup section.
c Update the BIOS and iDRAC versions.
d Re-enable the Trusted Platform Module (TPM). See the Re-enabling the TPM for BitLocker users section.
Related links
Installing the processor
Instalación del disipador de calor
Installing the optional iDRAC port card
Installing the expansion card riser
Installing a memory module
Installing the cooling shroud
Restoring the Service Tag by using the Easy Restore feature
By using the Easy Restore feature, you can restore your Service Tag, license, UEFI configuration, and the sistema configuration data after
replacing the system board. All data is automatically backed up in a backup flash device. If BIOS detects a new system board and the
Service Tag in the backup flash device, BIOS prompts the user to restore the backup information.
1 Turn on the sistema.
If BIOS detects a new system board, and if the Service Tag is present in the backup flash device, BIOS displays the Service Tag, the
status of the license, and the UEFI Diagnostics version.
2 Perform one of the following steps:
• Press Y to restore the Service Tag, license, and diagnostics information.
• Press N to navigate to the Dell Lifecycle Controller based restore options.
• Press F10 to restore data from a previously created Hardware Server Profile.
After the restore process is complete, BIOS prompts to restore the sistema configuration data.
3 Perform one of the following steps:
• Press Y to restore the sistema configuration data.
• Press N to use the default configuration settings.
After the restore process is complete, the sistema restarts.
Introducción de la etiqueta de servicio del sistema mediante System Setup
(Configuración del sistema)
Si Easy Restore (Restauración fácil) no logra restaurar la etiqueta de servicio, utilice System Setup (Configuración del sistema) para
introducir la etiqueta de servicio.
1 Encienda el sistema.
2 Presione F2 para entrar en System Setup (Configuración del sistema).
3 Haga clic en Service Tag Settings (Configuración de etiquetas de servicio).
4 Introduzca la etiqueta de servicio.
NOTA: Puede introducir la etiqueta de servicio solo cuando el campo Etiqueta de servicio está vacío. Asegúrese de
introducir la etiqueta de servicio correcta. Una vez introducida la etiqueta de servicio, no se puede actualizar ni modificar.
5 Haga clic en Ok.
Instalación y extracción de los componentes del sistema 135