Figure 22. Installing the cooling shroud
1
cooling shroud
3
guide pin on the chassis wall
Next step
Follow the procedure listed in
Related links
Removing the optional front bezel
Instalación del bisel frontal opcional
System memory
Your system supports DDR4 ECC unbuffered DIMMs (UDIMMs).
NOTE:
MT/s indicates memory module speed in Mega Transfers per second.
Memory bus operating frequency can be 1600 MT/s, 1866 MT/s, 2133 MT/s, or 2400 MT/s depending on the following factors:
•
System profile selected (for example, Performance Optimized, Custom, or Dense Configuration Optimized)
•
Maximum supported memory module frequency of the processors
The system contains four memory sockets — two sets of 2–sockets each. Each 2–socket set is organized into one channel. In each 2-
socket set, the first socket release lever is marked white and the second socket release lever is marked black.
66
Instalación y extracción de los componentes del sistema
Después de manipular el interior del
2
guide on the cooling shroud
sistema.