Before Switching Off The Power; Preset Functions And Operations - Denon DN-C615 Instrucciones De Operación

BEFORE SWITCHING OFF THE POWER

11
When you have finished using the CD player, before switching off the power be sure that the disc holder has been
closed with the OPEN/CLOSE ( ) button.
5
CAUTION:
• Do not forcibly close the disc holder when the power is off. It may damage the unit when it is transported.
12

PRESET FUNCTIONS AND OPERATIONS

(1) List of Preset Functions
• Functions can be preset using the buttons on the front panel. These presettings are stored in a permanent
memory, so they are not cleared even when the power is turned off.
• The functions shown on the table below can be preset. Set the functions according to the usage purpose to
efficiently achieve even higher quality playback.
• One of the preset functions can be used to display information on this set (microprocessor version).
Preset function type Description
Preset type Selection of preset type.
Program 1 Setting of whether or not to play program 1.
Program 2 Setting of whether or not to play program 2.
Program 3 Setting of whether or not to play program 3.
Power on mode Setting of operation when power is turned on.
Time mode Setting of play mode when power is turned on.
Random Setting of time mode when power is turned on.
Finish mode Setting of operation when playback ends.
Setting of operation when select knob is turned during
Next Track Reserve
playback.
Selection of whether or not to inhibit the panel switches
Play lock
during playback.
Panel lock Selection of whether or not to enable the panel buttons.
Setting of whether or not to perform the auto cue
Auto cue
operation and the audio startup level.
Play speed Standard playing speed setting.
Text display Selection of time or text display.
Frame display Selection of whether or not to display frames.
Setting of whether or not to display the EOM and display
E.O.M.
time setting.
Setting of whether or not to automatically stop the servo
Auto stop
functions.
RC cord RC cord setting.
IR remote Infrared remote control sensor setting.
Play mode Setting of play mode when power is turned on.
Preset function type
Cascade
Preset clear
Set information
Play list (MP3)
(2) Presetting procedure
1 Press the STOP (
2 Press the 8 or 9 button o !0 and select the preset item.
3 Press the PLAY (
4 The preset mode is canceled when the STOP (
Set upon shipment
No.
from factory
Preset Type 1 1
Program 1 OFF 2
Program 2 OFF 3
Program 3 OFF 4
Power On Stop 5
Time ELAPSED 6
Random OFF 7
Finish Stop 8
Reserve. OFF 9
Play Lock OFF 10
Panel OFF 11
CueDet. OFF 12
Normal Speed 13
Text OFF 14
FR Disp ON 15
E.O.M. 10 s 16
Sleep 30min 17
RC DENON 18
IR ON 19
Play CONTINUE 20
Description
Selection of whether or not to output cascade signal.
Setting for clearing presets and setting them to the initial
values.
Microprocessor version display.
Setting of whether or not to perform the play list.
) button u while presetting the TITLE button @1 .
2
) button y to change the setting.
1
) button u. The setting are writeen at this time.
2
ENGLISH
Set upon shipment
No.
from factory
Cascade OFF 21
Ini. Preset 22
Ver. **** (* = number) 23
Play List OFF 24
13