Cool Mode; To Turn Off - Sharp CV-P10NC Manual De Instalación Y Funcionamiento

COOL MODE

"CLOSE" position
Install the exhaust hose (See Page14), turn
the drainage nozzle to the CLOSE position,
and check the drainage nozzle is covered
Drainage nozzle
with the stopcock.
1
Stopcock
2
3
2
3
1
4
4

TO TURN OFF

Press the POWER button again.
• The red OPERATION lamp on the unit will turn
off.
E-18
Press the MODE button to select
COOL mode.
COOL DEHUM
Press the POWER button to start op-
eration.
• The red OPERATION lamp on the unit will
light.
Press the TEMPERATURE button to
set the desired temperature.
• The temperature can be set within the
range of 64°F to 86°F.
Press the FAN button to set the de-
sired fan speed.
AUTO QUIET
FAN VENT
LOW HIGH