Quality Control; Automatic Self-Test - NIPRO Diagnostics TRUE2go Manual Del Propietário

Quality Control Testing
To assure you are getting accurate and
reliable results, TRUE2go offers two
kinds of quality control tests. These tests
let you know that your TRUE2go System
is working properly and your testing
technique is good.

Automatic Self-Test

An Automatic Self-Test is performed
by the Meter each time a TRUEtest
Test Strip is inserted correctly into the
Test Port.
Insert a Strip into the Test Port.
The Meter is working properly if:
- the full Display appears, then
- the Drop Symbol begins to blink.
If an error message appears in the
Display, the Meter will not perform
a test. See Troubleshooting or call for
assistance (see cover for phone number).
Caution! If any segments are missing in the
Display when Meter is first turned on,
do not use the Meter for testing. Call for
assistance.
15
Full Display
Drop Symbol