Changing Battery - NIPRO Diagnostics TRUE2go Manual Del Propietário

Changing Battery

If "Lb" or "db" appears in Display,
change battery. To replace battery:
1. Remove Meter from vial (see Attach/
Remove TRUE2go Meter to TRUEtest
Test Strip Vial).
2. Turn Meter over to see Meter label
and Battery Cover are showing.
3. Place edge of a coin in slot in center
of Battery Cover. Twist coin slightly
counterclockwise until Battery Cover
is loose. Remove coin.
4. Holding the Meter over your other
hand, turn the Meter over. Battery
Cover and battery drops out.
5. Turn Meter back over. Replace
battery with new 3V non-rechargeable
lithium battery (#CR2032), positive
("+") side facing up.
6. Replace Battery Cover, with slot facing
up and metal tips in notches. Firmly
push Battery Cover down using edge
of coin. Turn coin slightly clockwise
to close.
7. Re-attach Meter to vial (see Attach/
Remove TRUE2go Meter to TRUEtest
Test Strip Vial).
28
Slot