NIPRO Diagnostics TRUE2go Manual Del Propietário página 9

IMPORTANT INFORMATION:
For the most accurate results using TRUE2go:
• Read all instructions before testing.
• TRUE2go is an in vitro (outside body) quantitative
system that is used for self-testing and point-of-
care testing of human whole blood only.
• Meter displays results as plasma values.
• Use only TRUEtest™ Test Strips and TRUEtest Glucose
Control with TRUE2go Meter.
• Do not use for diagnosis of diabetes or for
testing blood glucose in newborns.
• Perform Control Tests before performing a blood
glucose test for the first time
(see Getting Started).
Note: Three levels of TRUEtest Glucose Control Solution
are available for Quality Control Testing. It is
important to perform Control Tests with more than
one level of Control to assure your System is working
properly and your testing technique is good. Contact
place of purchase or call for assistance to obtain
Control.
• When carrying your TRUE2go System with you,
do not leave it where the storage temperature
printed on vial label may be exceeded (car, trunk,
briefcase, etc).
• Remove only one Strip at a time from vial when
testing. Recap vial immediately after removing
Strip.
7