NIPRO Diagnostics TRUE2go Manual Del Propietário página 20

6. Wait until Drop Symbol appears in
Display. Keep Strip in Meter until
testing is finished.
Note: If Strip is removed before testing
is finished, an error message
appears. Release and discard old
Strip. Use new Strip for testing.
7. Turn Control bottle upside down.
Squeeze one drop of Control onto
a clean tissue. Wipe off bottle tip.
8. Gently squeeze a Control drop onto
a small piece of unused aluminum
foil or clear plastic wrap. Dispose
after use.
9. With Strip still in Meter, touch edge
of Sample Tip to drop of Control.
Allow drop to be drawn into Strip.
10. Remove Strip from drop. Dashes
appear across the Display to show
Meter is testing.
Note: If Meter does not begin testing
soon after drawing up sample,
release and discard Strip. Repeat
test with new Strip. If problem
persists, see Troubleshooting.
18
Drop Symbol
Meter Testing