Installing And Connecting; Use; First Use; Fuel - Dovre TAI 45 W Instrucciones De Instalacion Y Uso

6
7
3
8
4
5
1 2 3 4
Connecting to the top
As standard, the appliance is delivered with the con-
nection collar fitted for a connection at the top, see fol-
lowing figure.
On delivery, the connection at the rear is closed, so
that a back cover does not need to be installed.
Because of the distance to the (combustible)
wall, the protection plate may not be removed
in the back shield.
Subject to change because of technical improvements
5
09-20020-371

Installing and connecting

1. Position the appliance in the correct place, and
2. Connect the appliance to the flue hermetically.
3. Re-position all removed parts in the correct places
The appliance is now ready for use.

Use

First use

When you use the appliance for the first time, make
an intense fire and keep it going for a good few hours.
This will cure the heat-resistant paint finish. This may
result in some smoke and odours. You could open win-
dows and doors for a while in the area in which the
appliance is located.

Fuel

This appliance is only suitable for burning natural
wood; sawn and chopped wood that is sufficiently dry.
make sure it is level.
in the appliance.
Never use the appliance without the fire-res-
istant inner plates.
1
2
3
4
5
09-20020-370
13