Movement RT Manual De Instrucciones página 87

ASSEMBLY OF THE EQUIPMENT
CAUTION!
Before starting to assemble your treadmill, care must be taken to ensure the
following:
•Make sure that the packaging is not damaged and that the parts and components
of the equipment are not damaged.
•It is recommended that the treadmill be unpacked at the place where it will be
assembled.
•The assembly location must be clean.
•The floor must be level, firm and hard to prevent treadmill instability.
•The space around the treadmill must be free as described in this Manual (see
Technical Specifications chapter).
•It is recommended that the treadmill be mounted away from moisture and
sheltered from sunlight in order to avoid damaging the electronic parts of the
equipment.
•The icons have the function of instructing the user which tool to use, how many
people should perform the assembly or cross-tighten the screws in the given step.
Allen n° 6
NOTE: Refer to the torque chart for how to properly tighten the screws or nuts on the
equipment.
TOOLS
Medium torque
thread lock
perform the assembly
ICONS
Phillips
Screwdriver
20
Two people are
recommended to
people
X
Cross-
tightening
Cross tighten
the screws
SCREW TIGHTENING TORQUE
SPECIFICATION TABLE
Diamter [mm]
50%
Do not apply
the final
tightening
on the screws
100%
Apply the final
tightening to
the screws
Torque [N.m]