Led Colour Variations; Ball Nozzle(S); Air Regulator; Optional Accessories - BADU JET Perla Traduccion De Las Instrucciones

Commissioning/Decommissioning
NOTICE
The pump/unit may be damaged due to operation with a closed
volume regulator.
Only operate the pump/unit with an open volume regulator.

6.2.3

LED colour variations

The LED colour variations can be changed by pressing the button
(2) repeatedly within five seconds.
Colour sequence:
• Red
• Green
• Blue
• Green – Red
• Green – Blue
• Red – Blue
• Green – Red –
Blue
The colour variation will be maintained when pressed for longer
than five sceonds.
6.2.4

Ball nozzle(s)

The direction of the ball nozzle(s) (54) can be adjusted. The
nozzles should normally be set horizontally or pointing slightly
upwards. This provides the greatest effect for swimming against
the current.
6.2.5

Air regulator

The air regulator (2/1) allows air to be added to the water jet so
that an air bubble bath effect can be attained. The amount of air
can be adjusted.
6.2.6

Optional accessories

– Attachable massage nozzle
– Massage hose (with pulsator)
– Attachable pulsator
– Wireless control
28 EN
Change of colour:
• one second discrete
• 30 seconds slowly dimming
• flashing
• seven seconds dimming
• flickering "rolling out"
09|2018