Maintenance; Care Instructions - BADU JET Perla Traduccion De Las Instrucciones

8

Maintenance

NOTICE
 Before maintenance work, close all shut-off valves and drain
all pipes.
When?
Regularly
If there is a
chance of frost
 After completing all maintenance work, perform all necessary
measures for start-up. See point 6.1 on page 25.
8.1

Care Instructions

If needed, wash the unit with water and wipe with a damp cloth.
Do not use abrasive cleaning agents!
A few sprays of a cleaning agent especially for use on acrylic
surfaces can be used occasionally. Wipe with a clean, dry cloth.
Heavily soiled surfaces can be cleaned with warm soapy water or
a mild cleanser.
Limescale deposits/water spots can be removed with a mixture of
spirit vinegar and water. Removal of light scratches or rough spots
on shiny surfaces can be carried out using a care kit found in
sanitary supply stores.
09|2018
What?
 Check the pump is not leaking
 Check the stability of the unit, all
impurities should be removed
 Check the electrical contacts in general
Separate potential connector

 Remove the unit from the pool. Empty
and store it in a dry location.
Maintenance
EN 35