To Select The Source; R To Edit The Input Source Name - Samsung HP-T4254 Manual Del Proprietário

To Select the Source
Use to select TV or other external input sources such as DVD players or Set-top/Cable boxes connected to the TV.
Use to select the input source of your choice.
1
2
Press the MENU button to display the menu.
Press the _, or T button to select Input, then press the ENTER button.
Press the ENTER button to select Source List.
Press the ,A or T button to select signal source, then press the ENTER button.
_-- You can choose between the following sets of jacks: AV1, S-Video1,
Component1, Component2, PC, HDMil, or HDMi2 on the TV's rear panel
and AV2, S-Video2, or HDMI3 on the TV's side panel.
_-- HDMil, HDMI2, or HDMi3 input can only be selected when the external
device is turned on and connected via HDMi.
_-- You can choose only those external devices that are connected to the TV.
You can also press the SOURCE button on the remote control to view an external
signal source.
To Edit the input Source Name
You can name the device connected to the input jacks to make your input source selection easier.
1 Press the MENU button to display the menu.
Press the A or T button to select Input, then press the ENTER button.
Press the _, or T button to select Edit Name, then press the ENTER button.
2 Press the ,A or T button to select AVl, AV2, S-Video1, S-Video2,
Component1, Component2, PC, HDMII, HDMI2, or HDMI3 input jack,
then press the ENTER button.
Press the A or T button to select VCR, DVD, D-VHS, Cable STB, HD STB,
Satellite STB, PVR STB, AV Receiver, DVD Receiver, Game, Camcorder,
DVD Combo, PC, VOD STB, or TV input source, then press the ENTER button.
Press the EXIT button to exit.