[] Wall- Mount Adjustment; (Sold Separately) - Samsung HP-T4254 Manual Del Proprietário

Wall- mount adjustment (Sold separately)
Once the wall mount is installed, the position of your TV can be easily adjusted.
Auto Wall-Mount
TV Rear Panel
EX-UNK Cable (Not supplied)
Entering the menu
1 Press the MENU button to display the menu.
Press the A or T button to select Setup, then press the ENTER button.
2 Press the A or T button to select Wall-Mount Adjustment, then press the
ENTER button.
3 Adjust to the desired position using the A/_'/4/I_- buttons.
Press the EXiT button to exit.
_-- If you press an arrow button when no OSD is displayed on the TV screen, the
Adjustment screen appears.
_-- When you turn the power off, your TV moves to the initial installation position.
When you turn the power on, your TV moves to the last remembered position
you adjusted.
Using the remote Control Buttons
Wall-mount angle Tilt Up, Tilt Down, Move right, Move left
adjustment
Reset Moves to the initial installation position
Remembering the Remembers 3 positions with the Red,
P._=E,.,,o_E_,,_. position and moving Green and Yellow buttons.
to the remembered Moves to the remembered position using
position these 3 color buttons.
_-_ For installation, refer to the Installation Manual provided.
:,_ For product installation and the installation and moving of the watt mount, make
sure to consult a specialized installation company.
_-- This installation manual is to be used when attaching the wall mount to a wall.
When attaching to other building materials, please contact your nearest dealer