Using The Energy Saving Feature; Preventing Screen Burn-In - Samsung HP-T4254 Manual Del Proprietário

Using the Energy Saving Feature
This feature adjusts the power consumption of the unit in order to save energy.
1 Press the MENU button to display the menu.
Press the A or T button to select Setup, then press the ENTER button.
2 Press the _, or T button to select Energy Saving, then press the ENTER
button.
Press the ,A or T button to select Off, Low, Medium, or High, then press the
ENTER button.
Press the EXIT button to exit.
off: Switches offthe Energy Saving mode.
, Low: Operatesin standard mode.
• Medium: Enters medium power saving mode.
• High: Enters maximumpower saving mode.
Preventing Screen Burn-in
To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This
technology enables you to set picture movement up/down (Vertical Line) and side to side (Horizontal Dot).
The Time setting allows you to program the time between movement of the picture in minutes.
1 Press the MENU button to display the menu.
Press the A or T button to select Setup, then press the ENTER button.
2 Press the A or _' button to select Screen Burn Protection, then press the
ENTER button.
Press the ENTER button to select Pixel Shift, then press the ENTER button.
Pressing the A or _' button will alternate between On and Off.
You will also see the items Horizontal Dot, Vertical Line and Time.
• Pixel Shift: Using this function,you can minutely move pixeis on the PDP in horizontalor
vertical directionto preventafter-imageson the screen.
Press the A or V button to select the item you wish to change, then press the
ENTER button.
Press the _, or v button to change the value of the item, then press the ENTER
button.
. Optimum condition for pixel shift;
....................................... i:c ......
Horizontal Dot 1 2
Vertical Line 1 2
.............. T!me(min) ................. 2 ........................................................ 2.................................................
Press the EXIT button to exit.