Technical Data - Migatronic MCU 1000 Guía De Usuario

Connection and start-up
PI 350
Connection of a water cooling unit
Fasten the module under the machine with the fitting (1).
Mount the 4-poled plug (2) in the corresponding socket in the
machine (3). Mount the flow hose on the water cooled torch in
the quick connection marked with blue (4) and the return hose
in the quick connection marked with red (5).
It will be necessary to inspect regularly the cooling liquid level
by means of the level control (6). The refilling of cooling liquid
takes place through the filler neck (7).
PI
350
5
4
7
6
1) Equipment marked IP23 is designed for indoor and outdoor applications
Gas
F
F F
Power
1

Technical data

COOLING UNIT
Mains voltage (50-60Hz), V
Cooling capacity, W
Tank capacity, litre
Flow, bar - °C - l/min
Pressure max, bar
Standard
Protection class (IEC 529)
1
Dimensions (hxwxl), mm
Weight incl. fluid, kg
*) Separate cooling unit for PI 200/250
3
COOLING UNIT
Mains voltage (50-60Hz), V
Cooling capacity, W
Tank capacity, litre
Flow, bar - °C - l/min
Pressure max, bar
2
Standard
Protection class (IEC 529)
1
Dimensions (hxwxl), mm
Weight incl. fluid, kg
*) Separate cooling unit for PI 350DC & Omega 400C/500C
9
MCU 1000*
230 (78812052/78812053)
400 (78812050/78812051)
900
2.5
1.2 - 60 - 1.75
3.5
IEC60974-2. IEC60974-10 CL.A
IP23
270x220x520
15.0
MCU 1100*
400
900
3.5
1.2 - 60 - 1.75
3.5
IEC60974-2. IEC60974-10 CL.A
IP23
276x211x276
16.0