General Information - salmson ACSON VARIO Instalacion Y Puesta En Servicio

English
Installation and operating instructions

1 General information

About this document
The language of the original installation and operating instruction is French.
All other languages of this instruction are translations of the original installation
and operating instruction.
This installation and operating instruction is an integral part of the product. It
must be kept readily available at the place where the product is installed. Strict
adherence to this instruction is a precondition for a correct installation and
proper use of the product.
This installation and operating instruction corresponds to the relevant version
of the product and the underlying safety standards valid at the time of going to
print.
EC declaration of conformity:
A copy of the EC declaration of conformity is a component of this installation
and operating instruction. If the ranges mentioned in this instruction are subject
to changes without any prior approval, this declaration is no more valid.
2 Safety
This operating instruction contains basic information which must be adhered to
during installation and operation. For this reason, this operating instruction
must, without fail, be read by the service technician and the responsible opera-
tor before installation and commissioning.
It is not only the general safety instructions listed under the main point "safety"
that must be adhered to but also the special safety instructions with danger
symbols included under the following main points.
2.1 Indication of instructions in the operating instruction
Symbols:
General danger symbol
Danger due to electrical voltage
Note:
Signals:
DANGER!
Acutely dangerous situation
Non-observance results in death or the most serious of injuries.
18 Pompes Salmson 08/2013