Menu Description - salmson ACSON VARIO Instalacion Y Puesta En Servicio

English
Press the push-button
navigate in both submenus SETTINGS or HISTORIC.
SETTINGS
This submenu allows the setting of the Acson Vario according to the installation
and the pump.
HISTORIC
This submenu displays the various counts and alarms recorded.
To select a submenu, use the the push-buttons
select it.
The values displayed in the various parameter can be changed via the push-but-
tons
and the next parameter is displayed on the screen. With the push-button
you exit SETTINGS (no saving of the last change) or HISTORIC menu and go back
to STANDARD display mode (or SERVICE).
NOTE: The data are saved in non-volatile memory, this allows to save data even
after switching off.

6.3.1 Menu description

Display
NET P P SET
02.0 bar 02.0 bar
F P SET NET P
50 02.0 bar 02.0 bar
MENU
LANGUAGE
ENGLISH
I. MAX. PUMP
OFF
24
for 3 seconds to set the Acson Vario. The user can
or . With the push-button
Menu level 1
Q
1
SETTINGS
or
the new value selected is validated
Menu level 2 Description
Display in STANDARD
mode
Display in SERVICE
mode
rotation frequency
(Hz) + pressure setting
(bar) + networkpres-
sure (bar) + flow
switch detection
(1 or 0)
Menu settings
LANGUAGE Language setting
I. MAX. PUMP Nominal current set-
ting as mentioned on
the identification plate
of the pump
, then push to
Pompes Salmson 08/2013