Care And Maintenance; Repairs - Festo ERMB Serie Instrucciones De Utilizacion

ERMB
8

Care and maintenance

Warning
Uncontrolled moving masses can cause injury to people or damage to property
(danger of fingers being squashed). Controller signals can cause unintentional
movements of the ERMB.
S Switch off the controller for all maintenance work on the ERMB and protect it
from being switched on again unintentionally.
If necessary, clean the ERMB with a soft cloth.
S
Cleaning agents: all non−abrasive media.
Optimizing the service life of the toothed belt with swivel angles less than 360°:
1. Carry out the following steps after every 2 million load changes:
Turn the switching ring (E) 90° (è chapter 5 Fitting electric components")
Dismantling the work load.
Also turn the work load 90° in the same direction.
Mount the work load again.
A different part of the toothed belt then comes into the loading zone of the
toothed gear.
2. Repeat the commissioning.
9

Repairs

Recommendation:
Return the product to our repair service for overhaul.
S
The necessary accurate adjustments and tests will then be taken into account.
Festo ERMB 0802NH English
27