Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
DGEA−...
10
Service and maintenance
·
If necessary, clean the exterior of the DGEA with a soft cloth.
The following cleaning agents are permitted:
soap suds or water (max. 60 °C)
all non−abrasive cleaning agents
·
Make sure that the lubrication intervals are observed.
If the device is not operated frequently, lubrication should take place at the
latest after 3 years.
Lubrication interval for DGEA
First interval
Subsequent
interval
(alternatives)
( l
Amount of grease per lubrication point
Fig. 16: Lubrication intervals and types
·
Note that lubrication must be undertaken more often in the case of:
dusty and contaminated environment
working strokes < 50 mm
speeds > 2 m/s
·
Grease the bearings at the lubrication
points with permissible lubricants.
DGEA−25/40: 1, 2, 3 and 4.
DGEA−18: 1 and 2 or 3 and 4.
Depending on the design, each of the
lubrication points can be greased via two
alternative lubrication nipples. In this
case, you can use the lubrication nipple
that is more accessible.
Grease gun: LUB−1 (è Accessories
chapter) requires 0.5 cm
Festo DGEA−... 0904b English
Festo special grease
LUB−KC1
i
)
Festo special grease
LUB−RN2
Festo special grease
LUB−LG0
3
per stroke.
18
25
5000 km
400 km
400 km
5000 km
5000 km
Not permissible
3
3
3 cm
1.5 cm
2
1
3
Fig. 17
40
3
1.5 cm
4
45
Publicidad
Tabla de contenido
