Care And Maintenance - Festo HSW-AP Serie Instrucciones De Utilizacion

HSW−...−AP/A S
9

Care and maintenance

If the HSW−... is dirty, clean the exterior with a soft cloth.
S
If the HSW−... is defective or if the drive on the HSW−...−AP is defective:
Send the HSW−... to Festo for repairs.
S
Lubrication
Grease the surfaces of the roller bearing guide which do not have a layer of
S
grease (e.g. after cleaning) in accordance with the following table:
Component
Lubrication
point
Lubrication
interval
Lubrication
procedure
Lubricating
grease
Fig. 32
54
Guide rail (HSW−10/12−...)/
Nipple (HSW−16−...)
Every 10 million switching cycles
Swing the moveable mass into the end positions
by hand or
with hex socket (square in HSW−10−...) on the drive (Fig. 21)
LUB−KC1
Link track and swivel
lever
Festo HSW−...−AP/AS 0707a English