Entering Password; Basic Menu - Pentair Water SFE-EV Manual De Uso Y Mantenimiento

5.1.2

Entering password

Access the basic menu by pressing the
buttons and for 5 seconds. Before you can enter the menu, you will be prompted for a password.
Let us assume in this case that the password to be entered is "2011": modify the digit by pressing the UP
arrow, switch to the next digit by pressing the DOWN arrow, confirm the password by pressing

5.2 Basic menu

The basic menu is used to set the most common operating parameters and display some significant parameters
set in the advanced menu. To access the basic menu, press the regeneration button
the menu is password protected (See section 5.1 for more information).
The basic menu contains the parameters shown in table 3. The parameters will be displayed one after the
other. Press the button
While the parameters are being changed, the regeneration icon flashes.
All the changes made are saved when the message End appears. Parameters changed during uncompleted
programming processes are not therefore saved.
button once only or access the advanced menu by pressing
Done
to move from one parameter to the next.
47
S F E - E V
.
once only. Access to
E
N
G
L
I
S
H