Pentair Water SFE-EV Manual De Uso Y Mantenimiento página 57

Activation mode:
1: 1st regeneration stage
2: 2nd regeneration stage
3: 3rd regeneration stage
4: 4th regeneration stage
5: End of regeneration cycle
6: Regeneration in progress
7: Salt alarm
Characterisation of
activation mode
End
Table 4 : Advanced menu parameters
Relay 1 activation mode. Press the
characterisation.
Activation Description
mode
1 1st regeneration stage
2 2nd regeneration stage.
3 3rd regeneration stage.
4 4th regeneration stage.
5 End of regeneration cycle.
6 Regeneration in progress (signal during the
complete regeneration process)
7 Salt alarm.
Relay 2 activation mode. Relay 2 is programmed in a similar manner to relay 1.
Manual opening of brine valve. Use the
mechanical movement animation will appear on the display. At the end of the
movement, the valve will be open (bMON). The valve is closed by pressing the
key. At the end of the movement, the valve will be closed (bMOF).
End of programming
key to change the activation mode, press the
key to activate brine valve opening. A
55
S F E - E V
key to change the
Characterisation
Default Min– Max
OFF OFF – duration of stage 1
OFF OFF – duration of stage 2
OFF OFF – duration of stage 3
OFF OFF – duration of stage 4
OFF OFF – duration of stage 5
OFF OFF – ON
OFF OFF – ON
OFF
N.A.
E
N
G
L
I
S
H
ON – OFF
N.A.