Advanced Menu - Pentair Water SFE-EV Manual De Uso Y Mantenimiento

Opening time of brine valve to prepare total volume of brine (value rounded
up). This parameter is only displayed and can be modified only in advance
programing mode (see section 5.3)
End of programming. Basic parameter pograming is complete. Modifications
are being saved by the controller.
Table 3 : Basic Menu Parameters

5.3 Advanced menu

The system operating parameters are set in the advanced menu. To access this menu, press the
buttons simultaneously for 5 seconds.
Access to the menu is password protected (see section 5.1).
If the "user password" is inserted, and the controller is programmed in a volumetric regeneration start
modality, the controller allows access only to holiday parameter setting. Otherwise if the controller is not set
in a volumetric regeneration start modality, the user password gives no access to parameter setting. If the
"technical service password" is inserted, controller allows full access to the advanced menu parameters.
The advance programming menu contains the parameters shown in table 4 . The parameters will be displayed
one after the other. Press the button
While the parameters are being changed, the regeneration icon flashes.
All the changes made are saved when the message End appears. Parameters changed during uncompleted
programming processes are not therefore saved.
to move from one parameter to the next.
49
S F E - E V
N.A. N.A.
and
E
N
G
L
I
S
H