List Of Appliance Parameters - Sime ECOMAXI 260 ErP Manual De Instalación, Uso Y Mantenimiento

Installation, use and maintenance manual
7.2.1

List of appliance parameters

Description of parameter
Password
Setpoint HOT H2O economy cycle
Setpoint HOT H2O automatic cycle
Setpoint COLD H2O
Setpoint H2O stop heat pump
Setpoint H2O activate digital input, solar
panel supplement
Setpoint H2O ANTIFREEZE
Setpoint solar thermal cycle
Setpoint cold evaporator
Setpoint faulty evaporator
Calibrate upper probe
Calibrate lower probe
Calibrate evaporator probe
Type of probe
Decimal point
Unit of measurement
Function associated with evaporator
probe
Local display data
Remote display data
Cooling down time on display in tenths
of a second
Operating setpoint differential
Minimum setpoint, auto cycle
Maximum setpoint, auto cycle
Minimum setpoint, economy cycle
Maximum setpoint, economy cycle
Lock changes to operating setpoint
Delay from appliance on
70
Abbre
Unit min Max.
viation
PA
SP1 °C/°F r3
SP2 °C/°F r1
SP3 °C/°F 10.0
SP5 °C/°F r1
SP6 °C/°F 40.0 100.0
SP7 °C/°F 0
SP8 °C/°F 0 100.0
SP9 °C/°F -25.0
SP10 °C/°F -50.0
CA1 °C/°F -25.0
CA2 °C/°F -25.0
CA3 °C/°F -25.0
P0 ---- 0
P1 ---- 0
P2 ---- 0
P4 ---- 0
P5 ---- 0
P6 ---- 0
1/10
P8 0
sec
r0 °C/°F 0.1
r1 °C/°F 10.0
r2 °C/°F r1 100.0
r3 °C/°F 10.0
r4 °C/°F r3 100.0
r5 ---- 0
C0 min 0
DOCUMENT 6328408
Default Notes
Specialist technical
0
personnel only
r4 55.0
r2 55.0
r2 45.0
SP2 62.0
62.0
40 10
40
25.0 -7.0
25.0 -25.0
25.0 2.0
25.0 0.0
25.0 0.0
0 = PTC
1 1 1 = NTC
2 = PT1000
1 = decimal point for
1 1
display temperature
0 = °C
1 0
1 = °F
0 = disabled
2 2 1 = defrosting start-stop
2 = start defrosting
0 = upper probe
1 = operating setpoint
3 0
2 = lower probe
3 = evaporator probe
0 = upper probe
1 = operating setpoint
3 0
2 = lower probe
3 = evaporator probe
250 5
30.0 7.0
r2 40.0
70.0
r4 40.0
62.0 (56°C for L versions)
1 = the setpoint cannot
1 0 be changed, it can only
be viewed
240 5 Compressor
devices
protective