Wolf TGB-40 Manual De Mantenimiento página 43

• Lever off the combustion chamber lid from the
combustion chamber using a screwdriver.
• Remove the combustion chamber lid.
Ensure a level removal to prevent damaging
Note:
the insulation.
• Release the heat exchanger from the condensate pan
using a screwdriver.
• Remove the heat exchanger upwards.
TGB-40/60 Maintenance instructions
Releasing the lid from the combustion chamber
Combustion chamber lid
Location of combustion chamber lid
Releasing heat exchanger from the condensate pan
Removing the heat exchanger upwards
43