Shoulder-Warmer Water; Operating Mode - Toto NEOREST SE Manual De Instrucciones

Using HydroHands and shoulder-warmer water
Fill the tub with water.
►See page 17.
Press the
● Please operate with the On/Off button set to on.
HydroHands and shoulder-warmer water come out from the ejection noz-
zle and the shoulder-warmer water outlets, respectively.

The bathtub won't function unless it has water in it. Fill the bathtub with hot water to Level 1 or more.

HydroHands and shoulder-warmer are operated at the same time. These functions cannot be
operated individually.

As lukewarm water in the piping comes out when the operation is started, it may feel cool at first. It is
also possible to set HydroHands/shoulder-warmer warm-up operation. ► See page 28.
Set the operating mode (ejection/outlet nozzle).

Operating Mode

Two-sided ejection/outlet
(Initial setting)
One-sided ejection/outlet
One-sided ejection/outlet

After starting operations 2 or 3, the system will automatically stop after approximately 15 minutes has
expired.

The time settings on the timer can be set to approximately 30 minutes. ► See page 28.

When you want to stop HydroHands/shoulder-warmer water, press the
19
to on.
to off.