Air Blower Operation - Toto NEOREST SE Manual De Instrucciones

Fill the tub with water.
►See page 17.
Press the
● Please operate with the On/Off button set to on.
Air will come out of the air jet cap.
Change the screen.
Set the operating mode and bubble intensity.
Normal operation
Mode
Normal
Oscillating
Pulsating
● The operating mode and bubble intensity settings are stored in memory.
Press
ӿ If the controller is not used, the system returns to auto after around one minute.

After starting operations 2 or 4, the system will automatically stop after approximately 15 minutes has expired.

The time settings on the timer can be set to approximately 30 minutes. ► See page 28.

When you want to stop the air blower, turn the
18

Air blower operation

to on.
Bubble Intensity
5
4
Runs at the bubble instensity settings.
3 (Initial setting)
2
1
Cannot be set The bubble intensity changes as follows: 5→4...→1→2...→5...
Cannot be set The bubble intensity changes as follows: 5→1→5→1→...
.
Other operation
Description of operation
to off.