Cleaning The Neorest; Cleaning The Tub - Toto NEOREST SE Manual De Instrucciones

Ocultar thumbs Ver también para NEOREST SE:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Cleaning the NEOREST

The shower is stored in the outlet module that fills the tub.
Running the water
Open the lid on top of the tub filling outlet.
Pull out the shower hose.
●Please do not use undue force. Otherwise, leaks or damage could
result.
Turn the cold water side knob counterclockwise.
●Starting with the hot water will result in only hot water coming out,
which could cause scalding.
Turn the hot water knob counterclockwise and ad-
just the water flow and temperature.
Turning off the shower
ӿ Please turn the knob slowly. Turning it off rapidly can cause a loud "boom" (water hammer),
which will impact the plumbing fixtures and could lead to leaks and water damage.
Be sure to start with the hot water and turn the
knob clockwise.
ӿ Starting with the cold water would leave just the hot water run-
ning, which could cause scalding.
Turn the cold water knob clockwise.
Reinsert the shower hose.
ӿ Caution: Do not insert the shower head downward. It may be
damaged.
Close the lid.
ӿ Please be careful not to pinch your fingers.
●After cleaning the tub, please press the Purge button on the controller and drain
the water. ► See page 33.
30

Cleaning the tub

Publicidad

Tabla de contenido
loading

Tabla de contenido