Charging Batteries - Velleman VLEVP2 Manual Del Usuario

no battery is placed in the c hannel
o
s hort c ircuit
o
battery voltage < 1 .0 V
o
battery is reversed or poorly connected
o
Charging LED Indication
c harger s elf- c hec k
c harger s tand- by
battery
ac tivated
c harging
fully c harged
U SB output
power
indic ation
 D ue to different battery types, deviation between the value on the
indicator and the battery's actual capacity exist. I n addition, when the
battery is c harging, the LCD displays the battery's c harging voltage
(inc luding the voltage generated by the battery's internal resistance).
When the battery is fully charged or not connected, the LCD displays
the no- load voltage of the battery.
6. Operation
Before c harging your batteries, c heck that the battery types are c ompatible
with the VLEVP2. T hen, determine the suitable charge c urrent and voltage
s ettings for them.
Remark
D amage c an occur to the batteries and c harger if incompatible batteries are
ins erted, or if improper c harge current and voltage settings are s elected.

Charging Batteries

1. C onnect the supplied power adapter to the VLEVP2. The VLEVP2
performs a s elf-check, turning on two LEDs (red s tatus indicator).
D uring the s elf-check, the LCD displays the battery power indicator
and the s elected voltage. After about two s econds, the two indicators
turn green. T he c harger then s witches to s tandby mode, no battery
ic on will be displayed but the s elected voltage and default 0 .25 A
c harge current.
2. Slide the voltage s etting s witch to c hoose the suitable voltage for your
battery. T he LCD will display the c orresponding selected voltage. For
example, if your battery's nominal voltage is 3 .6 V / 3 .7 V, then you
s hould choose the 3.6 V voltage.
V. 01 – 04/02/2015
s tatus
1 .0 V - 2 .0 V
< 1 .0 V
> 5 0 %
2 5 % - 5 0 %
5 % - 2 5 %
< 5 %
VLEVP2
L E D indic ation
red (2 s ec onds )
5
green
red
green
red
green
green
red
red flas hing
off
©Velleman nv