Safety - ESAB Origo Feed 302N P0 Manual De Instrucciones

1

SAFETY

Users of ESAB welding equipment have the ultimate reponsability for ensuring that anyone
who works on or near the equipament observes all the relevant safety precautions. Safety
precations must meet the requirements that apply to this type of welding equipment. The
following recommendations should be observed in addition to the standard regulations that
apply to the work place.
All work must be carried out by trained personnel well- acquainted with of the operation of the
welding equipment. Incorrect operation of the equipment may lead to hazardous situations
which can result in injury to the operator and damage to the equipment.
1. Anyone who uses the welding equipment must be familiar with:
l its operation
l location of emergency stops
l its function
l relevant safety precautions
l welding
2. The operator must ensure that:
l no unauthorized person is stationed within the working area of the equipment when
it is started up.
l no-one is unprotected when the arc is struck
3. The work place must:
l be suitable for the purpose
l be free from drafts
4. Personal safety equipment
l Always wear recommended personal safety equipment, such as a safety glasses,
frame-prooft clothing, safety gloves.
l Do not wear loose-fitting itens, such as scarves, bracelets, rings, etc., which could
become trapped or cause burns.
5. General precautions
l Make sure the return cable is connected securely.
l Work on high voltage equipment may only be carried out by a qualified electrician.
l Appropriate fire extinquishing equipment must be clearly marked and close at hand.
- 19 -