Tabla de contenido
Publicidad
Montaje en superficie - Fije los kits de espejo lateral (cont.)
Retire el forro de cada empaque.
Presione con firmeza el kit lateral a los empaques.
Repita este procedimiento con el otro kit lateral.
6.
All Installations - Checkout
Complete/Compléter/Termine Glass Shelves
Install door
bumpers.
Installer des butées
de porte.
Instale los topes de
la puerta.
Door Adjustment/Removal
Réglage/extraction
de porte
Ajuste/desinstalación
de la puerta
Adjust to plumb.
Ajuster pour mettre à niveau.
Ajuste que quede a plomo.
Complete
Reinstall the door, if applicable.
NOTICE: Prior to use, all hinge screws must be checked to make sure they are tight
and engaged in the hinge holes.
Verify all hinge screws in the door are tight and engaged in the hinge holes.
Install the bumpers at each outer corner of the door, if applicable.
Remove the protective film from each side of the door, inside of the cabinet, and
side kit.
Glass Shelves
Remove the protective film from each shelf.
With the flat part of each pin facing upward, "snap" each pin into the mounting
hole at the desired shelf height.
Rest each glass shelf on the pins.
1098186-2-B
Étagères de verre
Estantes de vidrio
Remove or adjust up
and down.
Retirer ou ajuster vers le
haut ou le bas.
Retire o ajuste hacia arriba
y hacia abajo.
12
Kohler Co.
Publicidad
Tabla de contenido
