Tabla de contenido
Publicidad
4.
Surface-Mount - Secure
Top of Cabinet
Supérieur du meuble
Parte superior del gabinete
Mounting Clip
Clip de fixation
Clip de fijación
Mounting Bar
Bar de fixation
Barra de montaje
If applicable, insert an anchor (provided) into each drilled hole.
Secure the mounting bar with three #8-2" Phillips screws (provided).
Separate the two clips.
With assistance, lift the mirrored cabinet onto the mounting bar and hold in place.
Slide a mounting clip onto each top corner, as shown. Each clip must slide all the
way onto the box of the mirrored cabinet.
Using a pencil, mark each mounting hole. Set the mounting clips and mirrored
cabinet aside.
Drill pilot holes or anchor holes at the marked location.
Secure each mounting clip through the finished wall and into the wood blocking.
Use anchors (if necessary) and #8-2" Phillips screws (provided).
Place the mirrored cabinet on the mounting bar.
Attach both top corners of the mirrored cabinet with the installed mounting clips,
as shown.
Montaje en superficie - Asegure
Si aplica, inserte un anclaje (provisto) en cada orificio taladrado.
Fije la barra de montaje con tres tornillos Phillips del #8-2" (provistos).
Separe los dos clips.
Con ayuda, suba el gabinete de espejo sobre la barra de montaje y sostenga en su
lugar.
Kohler Co.
9
1098186-2-B
Publicidad
Tabla de contenido
