Using The Menu - Olympus C-720 Ultra Zoom Manual Básico

GETTING STARTED (Cont.)
En
● The current settings stay the same even when the power is turned off,
unless they are readjusted.
● The date setting will be canceled if the camera is left with no batteries for
approximately 1 hour. If this happens, you will need to set the date again.
● The date/time setting may be canceled if the camera has stopped operating
because of a dead battery, etc.

USING THE MENU

When displaying menus, the first screen that appears on the monitor is called
the top menu. The contents of this menu change depending on the mode. On
the top menu, two types of menus are available: MODE MENU and the other
menus (shortcut menus).
Shortcut menu
The shortcut menu consists of the items
other than MODE MENU on the Top
menu. These can be replaced with your
favorite items, but only when the mode
dial is set to P/A/S/M or
pressing the arrow pad buttons
according to the marks shown next to
each item will lead you directly to their
screens.
(ex. P/A/S/M mode
top menu)
ISO
WB
How to Set a Function in MODE MENU
1
On the top menu, enter MODE MENU.
2
Select a tab (CAMERA, PICTURE, CARD, or SETUP) by using
í
Press
3
Select the function you want by using
4
Select your settings by using
16
ß
å
MODE MENU
.
Note
. Just
Mode menu
MODE MENU (displayed on the top menu)
contains all the functions that are available
and is divided into four tabs: CAMERA,
PICTURE, CARD, and SETUP. These can
be selected with the tabs on the left of the
Ññ
screen by using
Ññ
. Press
Ññ
. Press
(ex. P/A/S/M mode
Top menu)
ISO
MODE MENU
WB
.
í
.
.
Ññ
.