Listening Modes; Supplementary Information - Pioneer FS-W40 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 120
> Before Start
> Part Names

Listening Modes

b
c
d
> Install
> Setup
Selecting Listening Modes
You can change the listening mode during play by pressing
repeatedly "AUTO/DIRECT", "SURR", or "STEREO".
AUTO/DIRECT button (b)
Press repeatedly and the listening modes suited to the input
signal are switched between "Auto Surround" and "Pure
Direct". After selecting one of them, "Auto Surround" or
a
"Pure Direct" is displayed on the display of the sound
system controller, then the most suitable listening mode for
the audio format is selected automatically (Dolby Digital for
multi-channel input signals, Stereo for 2 channel input
signals, etc.) and an indicator such as "Dolby D" is
displayed on the display.
The "Pure Direct" mode shuts down processes that affect
sound quality, so you get a more faithful reproduction of the
original sound.
SURR button (c)
By pressing repeatedly you can select the audio format of
the signals being input and switch between a variety of
listening modes. Select the mode that suits your preference.
The selected listening mode is displayed on the display.
> Playback
The display changes
automatically.
Supplementary information | Firmware Update | Others
STEREO button (d)
You can select the "Stereo" mode to playback only from the
front speakers and subwoofer.
E
N
35

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido