How To Update Firmware; Others - Pioneer FS-W40 Manual De Instrucciones

> Before Start > Part Names

How to update firmware

This unit has functionality to update the firmware of the
sound system controller (the system software) over a
network or by the USB port. This enables us to make
improvements to a variety of operations and to add
features. (For details about the updated play operations,
see P46)
The update may take about 30 minutes to complete for
either method: via network or via USB. Furthermore,
existing settings are guaranteed regardless of the method
used for update.
Note that when this unit is connected to a network, you may
see notifications about firmware updates on the display. To
execute updating, select "Update" with the cursor buttons of
the remote controller and press ENTER. "Completed!" is
displayed when the update is complete.
0 For the latest information on updates, visit our company's
website. There is no need to update the firmware on this
unit if there is no update available.
0 During an update, do not
– Disconnect and reconnect any cable or USB storage
device, or perform any operation on the component
such as turn off its power
– Accessing this unit from a PC or smartphone using an
application
Disclaimer: The program and accompanying online
documentation are furnished to you for use at your own risk.
We will not be liable and you will have no remedy for damages
for any claim of any kind whatsoever concerning your use of the
program or the accompanying online documentation, regardless
of legal theory, and whether arising in tort or contract.
In no event will we be liable to you or any third party for any
special, indirect, incidental, or consequential damages of
any kind, including, but not limited to, compensation,
reimbursement or damages on account of the loss of
present or prospective profits, loss of data, or for any other
reason whatsoever.
> Install > Setup
Updating the Firmware via Network
0 Check that the unit is turned on, and the connection to
the Internet is secured.
0 Turn off the controller component (PC etc.) connected to
the network.
0 Stop any playing Internet radio, USB storage device, or
server content.
0 When "Hardware" - "HDMI" - "HDMI CEC" in the System
Setup menu is set to "On", set it to "Off".
0 The description may differ from the on-screen display but
that will not change the way to operate or the function.
1. Switch the input on the TV to that assigned to the unit.
2. Press on the remote controller.
System Setup
TV Out
Wireless Speaker
3. Select "Miscellaneous" - "Firmware Update" - "Update via
NET" with the cursors in order, then press ENTER.
> Playback
Supplementary information |
0 If "Firmware Update" is grayed out and cannot be
selected, wait for a while until it starts up.
0 You will not be able to select "Update via NET" if there is
nothing to update.
4. Press ENTER with "Update" selected to start update.
0 During the update, the TV screen may go black
depending on the updated program. In that case, check
the progress on the display of the sound system
controller. The TV screen will remain black until the
Hardware
update is complete and the power is turned on again.
0 "Completed!" is displayed when the update is complete.
5. Press Í/l on the sound system controller to turn the unit
into standby mode. The process is completed and your
firmware is updated to the latest version.
0 Do not use Í on the remote controller.
Firmware Update
Miscellaneous
Firmware Update Lock
Initial Setup Load Default

| Others

E
N
47