Presser Foot Lifter; Foot Pressure Dial; Attaching And Detaching Presser Foot - Janome hd9 Manuel De Instrucciones

Presser Foot Lifter

q Presser foot lifter
w Normal up position
e Highest position
The presser foot lifter q raises and
lowers the presser foot.
You can raise it higher e than the
normal up position w to help you place
thick material under the foot.
NOTE:
The machine will not run if the presser foot is in up
position.

Foot Pressure Dial

q Foot pressure dial
w Setting indicator
The foot pressure control dial should be
Reduce the pressure for appliqué,
fabrics.
fabrics.
NOTE:
Do not reduce the foot pressure lower

Attaching and Detaching Presser Foot

q Setscrew
To change the presser foot, raise the
presser foot lifter.
Loosen the setscrew q, choose the
proper foot and insert it from the bottom.
Tighten the setscrew q with the large
screwdriver to secure the foot.
e
w
q
q
12
q
0
1
2
w
3
4
5
q