Measurements; Parameter Selection; Sequence Number; Sample Id - MACHEREY-NAGEL QUANTOFIX Relax Manual De Instrucciones

9. Measurements

The instrument is designed for the quick and easy measurement of test strips.
The following points outline set-up options with regards to measurements as
well as the actual measurement procedure.

9.1 Parameter selection

The instrument cannot detect different test strips for different parameters or
ranges automatically. Therefore, initially you have to activate the test strip you
want to measure. The currently activated test is displayed in the start screen
next to the button. Always make sure that the test strip you are using cor-
responds to the activated test.
To activate a particular test for a measurement, press
pears which includes up to 5 pre-defined tests (see 13.1.1 Favorites, p. 80).
To activate one of these favorites, press the corresponding button. The start
screen appears and the desired test is activated and is displayed next to the
button.
To activate a test that is not part of the favorites list, press
all available tests appears. Use the arrows to select a test. Press
confirm your selection, the start screen appears and the desired test is activated
and is displayed next to the
your selection is not adopted.
Generally, the instrument saves the last used test and keeps it activated in the
start screen.

9.2 Sequence number

shows a continuous number for every measurement for a given day. The
SN:
counter starts at 0001. To change the sequence number, press
menu appears and you can enter the desired number.
For every new day, the sequence number is set back to 0001.

9.3 Sample ID

shows the sample ID for the next measurement. To enter or change the
ID:
sample ID, press
sample ID. Once you enter the sample ID,
ID by pressing ,
� �
and saved using the same sample ID. Using the search mode (see 11.2 Search,
p. 74), you can retrieve the results from the instrument memory. Pressing
twice removes the lock. You can also enter the sample ID using a barcode scan-
ner or a keyboard (see 5.2.4 Barcode scanner / keyboard, p. 62).
MN Manual QUANTOFIX
button. If you leave the list by pressing
. The input menu appears and you can enter the desired
ID:
appears. The following measurements are then always run
x
� �
Relax EN V 1.10 / 01.14
®
Manual QUANTOFIX
appears. You can lock the sample
� �
Relax
®
. A new screen ap-
. A list with
. . .
to
. The input
SN:
� x
69
,
�