Getting Started; Attaching The Brush Head; Charging Your Sonicare; Battery Charge Indicator - Philips Sonicare HealthyWhite 700 Serie Manual Del Usuario

- Not shown: UV light bulb
- Not shown: Sanitizer drip tray
- Not shown: Protective screen for UV light bulb
Note: The contents of the box vary based on model purchased

getting started

Changing the color code ring
Sonicare brush heads come with interchangeable color code rings to identify your brush head.
To change the color code ring:
1 Pull the color code ring from the bottom of the brush head.
2 Install a new ring by slipping one edge of the new ring over the bottom of the brush head.
Then press down on the other side to snap the ring into place.

attaching the brush head

1 Align the brush head so the bristles face the front of the handle.
2 Firmly press the brush head down onto the metal shaft until it stops.
Note: There is a small gap between the color code ring and the handle.

Charging your sonicare

1 Plug the charger into a live outlet.
2 Place the handle on the charger.
The battery charge indicator next to the battery symbol flashes to indicate that the
,
toothbrush is charging.

Battery charge indicator

The battery charge indicator shows the approximate remaining battery charge.
Deluxe charge indicator (select models):
- Solid green: 50-100%
- Flashing green: 10-49%
- Flashing yellow: less than 10%
Standard charge indicator (select models):
- Solid green: 50-100%
- Flashing green: less than 50%
Note: When the battery of your Sonicare is low, you hear 3 beeps after the completion of the brushing
cycle and the battery charge indicator flashes for 30 seconds.
Note: To keep the battery fully charged, you may keep your Sonicare on the charger when not in use. It
takes 24 hours to fully charge the battery.
EnglisH
5