Reducing The After-Image Of Fast-Moving Images (Clear Motion Drive (C.m.d.)) - JVC D-ILA DLA-X95R Manual Del Usuario

Reducing the After-image of Fast-moving Images (Clear Motion
Drive (C.M.D.))
By using the high-definition image interpolation technology developed by JVC, after-images that appear in fast-moving
scenes can be reduced.
This option is disabled during PC signal input, 3D signal input, and when "2D to 3D conversion" is set to "On".
0
For some scenes, interpolation may cause distortion in the image. In this case, set to "Off".
0
Original Image
Interpolation Enabled
.
46
Intermediate Frame Generation
Press the [C.M.D.] button
1
Pressing the [C.M.D.] button each time switches the mode in the following
0
sequence: "Off"""Low"""High"""Inverse Telecine"""Off"...
Setting
Off
Low
High
Inverse Telecine
* C.M.D. is the abbreviation for Clear Motion Drive.
* The [C.M.D.] button is positioned differently on the remote control depending
on the model in use. (p. 17)
Intermediate Frame Generation
Description
Interpolation is not performed.
Softens the image quality.
Image quality becomes softer than that of the "Low" setting.
60i/60p video images such as those of TVs and DVDs.
Suitable for original images that are 24-frame film sources.
Does not function for 24p video images.
0