Gamma
You can adjust the output value of the projected image with respect to the video signal input.
Æ "Adjusting the Output Value of the Projected Image (Gamma)" (p. 41)
Dark/Bright Level D C B
You can adjust the image quality to produce a sharp contrast in the brightness.
Æ "Compensating Highlights and Shadows (Dark/Bright Level)" (p. 44)
Picture Tone D C B
For reproducing the intensity of the exposure.
Setting
Tone White
Tone Red, Tone Green, Tone Blue
Contrast
For adjusting the difference in brightness to produce an image with contrast.
Setting range: -50 (little difference in brightness) to +50 (large difference in brightness)
0
Brightness
For adjusting the brightness of the video image.
Setting range: -50 (darker) to +50 (brighter)
0
Color
For adjusting the color density of the video image.
Setting range: -50 (lighter) to +50 (deeper)
0
Tint
For adjusting the hue of the video image.
Setting range: -50 (reddish) to +50 (greenish)
0
50
Setting range: -16 (darkens image for an underexposed effect) to
0
+16 (brightens image for an overexposed effect)
Setting range: -16 (underexposes red/green/blue) to +16
0
(overexposes red/green/blue)
Description